SolidWorks Integration new functionality
Cutted parts BOM
The new version of the integration between Solidworks and Odoo developed by OmniaSolutions allows to generate a Bom in Odoo starting from CAD Cut List.
We customize a rule to give a new automatic Part Number for each cut list item.
In the following example we used the following rule
POSITION_IN_CUT_LIST + _ + PARENT_PART_NUMBER + _ + PARENT_MATERIAL
The Designer just do the design and let the OdooPLM integration do the rest to go faster in production.
Solidworks
This is the designer part that the Solidworks designer use to build the cut list.
User need only to code the part and save it in Odoo, in this example I set
Part Number = OMNIA_DEFAULT
BOM inside odoo
This BOM is created automatically during the saving procedure give at odoo all the information that is needed from the production department in order to produce the part.
As you can see we saved all cut list items recovering
Position (CAD Item Position)
New Cut List Code and automatically created product (Product)
Quantity (Product Quantity)
If you have a different configuration you can simply switch the configuration, make an Edit Parts or a Clone procedure to assign new Part Number.
File Name will not be renamed, only component informations will be changed in this case.
In our example I setup Part Number = OMNIA_GREZZO and then save.
New Configuration
Here you can see the new cut list and new file geometry.
Take care that we changed also the raw material.
Leave a comment
You must be logged in to post a comment.